top of page

The MagBench Standard model (part: MBS) is designed for laptop computers and for use with applications that require extra space for tools and test instruments.  The Standard model has two raised tabs on the front edge to hold your laptop or tablet securely and it has three positions.  Our Security Strap kit can also be installed to provide extra protection to ensure that your laptop computer will not fall or be pulled off of the MagBench Workstation.


Changing the incline position from 90 to 100 or 120 degrees is done in a snap just by moving the two positioning blocks included with the MagBench.


The MagBench Standard Workstation can be installed on any steel surface in seconds with just two simple steps; place the MagBench Workstation against the steel surface, fold down the front panel, and you're ready to work!


MagBench Advantages:​​​​​​​

  • Made in the USA
  • Injection Molded with Polycarbonate/ABS blend which is stronger than Polyethylene molded products
  • No support wires needed which could break or limit laptop width
  • Neodymium Rare Earth magnets are smaller, but stronger than ferrous magnets
  • Can support up to 50 lbs. when mounted on 10-gauge steel
  • Over 50,000 units sold


MagBench Standard

Out of Stock
  • Product Description

    • Made in the USA
    • Injection Molded with High-Strength Polycarbonate/ABS blend
    • Molded hinge with Machined Aluminum Pins
    • Strong Neodymium Rare Earth magnets mount workstation to any steel surface
    • Opens to three different positions - 90 to 120 degrees (two Positioning Blocks included)
    • Workspace:  12" x 12"
    • Weight:  4 lbs. 2 oz.
    • Workstation can support up to 50 lbs. when mounted on 10-gauge steel
    • Includes carry bag and MagBench Surface Scratch Protection Vinyl Caps (qty. 4)
    • MagBench Data Sheet
  • Product Information


    The unique Patented design, using Rare Earth Neodymium magnets that provide extremely strong holding power, enable both models to hold up to 50 pounds or more! 


    It also has a comfortable handle for easy transportation and it works great for attaching tools or instruments with hooks.



    Some typical applications for use are:  Control panels, Electrical panels, Telecom panels, Air Conditioning units, Air compressors, Steel doors, Gang boxes, and many other steel surfaces. The applications are almost endless!


    Whether MagBench Workstations are used as a temporary solution for service work, a permanent installation in a control panel, or any other application, we know you will appreciate the simplicity and ease of use, as well as the ergonomic design.


    With its nearly indestructible design incorporating Polycarbonate/ABS blend, MagBench Standard Workstation will provide years of service.

bottom of page